chip:firststeps
This is an old revision of the document!
Table of Contents
First Steps with Next Thing CHIP
I've installed the commandline only configuration, basically because I am thinking only in do IOT things with this stuff.
Login and change default password
Default username and password:
username: chip password: chip
The first thing I did is change the default password for the chip
user and the root
user.
$ passwd chip $ sudo su $ passwd
Connect to wifi
I want to make an static, permanent wifi connection. To do so, I've copied the configuration of my raspberry pi, but with a new IP.
I've started by editing a new wlan1 file:
$ sudo vi /etc/network/interfaces.d/wlan1
And added the following configuration:
# # Wifi configuration # auto wlan1 allow-hotplug wlan1 iface wlan1 inet static address 192.168.0.XXXX network 192.168.0.XXXX netmask 255.255.255.0 gateway 192.168.0.XXXX wpa-ssid "YOUR-SSID-HERE" wpa-psk "YOUR-PASSWORD-HERE" dns-domain YOUR-DNS-DOMAIN-HERE dns-nameservers 8.8.8.8, 8.8.4.4
I've selected the dns nameservers of google, but you can configure whatever you want.
chip/firststeps.1470595473.txt.gz ยท Last modified: 2022/12/02 21:02 (external edit)