I have tons of msAccess databases, each of one runs a query. All of the queries are action queries, i.e. queries that dump its results into a new table, that must be erased each time.
I need to run all the queries in an ordered manner (some queries depend on others and so on..), so I quickly thought on an updating application that should be done in order to achieve the task.
For this task, and because I am orienting muy development skills through Java, I want to try to do this in java.
Let's see if it possible.
Failed: it is not possible to run an action query from java. Nor to execute a select * into table from query it is possible, because the new table appears empty (¿due to security constraints???).
Pending: to try it with access 2007, just to check if this will work in a newer database version. But I suspect that there is no difference.
How to access to an access database from JDBC-ODBC bridge driver. This article has a basic introduction to access a Microsoft Access database using java. The entry point for this stuff.
http://www.planet-source-code.com/vb/scripts/ShowCode.asp?txtCodeId=2691&lngWId=2
Mastering the Access sql engine
The sql engine of access is called Jet SQL. Here is a manual:
http://www.devguru.com/technologies/jetsql/home
Download a manual taken from Microsoft website
There is the manual online:
I am reproducing here literally the article I've found in Planet Source Code submitted by Jef Patterson
Sorry if the formatting is a little screwed up on this - PlanetSourceCode seems to modify my HTML just a little when I upload it…it should still all be readable enough…
If you find this useful, please vote for me!
and it's also
This will teach you how to connect to a Microsoft Access database. Once you are connected, you may run any SQL statement that is allowable on Access, such as:
This document goes at a pretty slow pace, so you may not need to cover every little detail here. If you are entirely new to JDBC, you shouldn't have too much trouble following along. So let's get going!
Steps to take:
There are three things we need to do to manipulate a MS Access database:
1) First we need to set up Java to understand how to communicate with an ODBC data source
2) After we set up the DriverManager, we need to get a Connection
There are two ways to get a connection from your Microsoft Access Database:
3) Once you have gained access to the Database (been granted a connection), you are ready to try:
This is the section that you will be most interested in - if you're impatient, you might want to start here...but please come back and read it all!
In addition, please refer to the section at the end of this document:
The first thing we must do in order to manipulate data in the database is to be granted a connection to the database. This connection, referenced in the Java language as an Object of type java.sql.Connection, is handed out by the DriverManager. We tell the DriverManager what type of driver to use to handle the connections to databases, and from there, ask it to give us a connection to a particular database of that type.
For this tutorial, we are interested in accessing a Microsoft Access database. Microsoft has developed a data access method called ODBC, and MS Access databases understand this method. We cannot make a connection directly to an ODBC data source from Java, but Sun has provided a bridge from JDBC to ODBC. This bridge gives the DriverManager the understanding of how to communicate with an ODBC (ie a MS Access) data source.
So the first thing we'll do is set up our DriverManager and let it know that we want to communicate with ODBC data sources via the JDBC:ODBC bridge. We do this by calling the static forName() method of the Class class. Here is an entire program that accomplishes what we're after:
class Test { public static void main(String[] args) { try { Class.forName(“sun.jdbc.odbc.JdbcOdbcDriver”); } catch (Exception e) { System.out.println(“Error: ” + e); } } }
save this code into a file called Test.java and compile it Notice the TRY-CATCH block. The forName() method might throw a ClassNotFoundException. This really can't happen with the JDBC:ODBC bridge, since it's built in to the Java API, but we still have to catch it. If you compile and run this code, it's pretty boring. In fact, if it produces any output, then that means that you've encountered an error! But it shows how to get your DriverManager set. We're now ready to try and get a connection to our specific database so we can start to run SQL statements on it! Step 2 method 1) Get a connection by direct access BACK TO TOP One way to get a connection is to go directly after the MS Access database file. This can be a quick and easy way to do things, but I have seen this not work on some windows machines. Don't ask me why - I just know that it works sometimes and it doesn't others… Here is a complete sample program getting a connection to a MS Access database on my hard drive at D:\java\mdbTEST.mdb. This sample includes the lines required to set the DriverManager up for ODBC data sources: import java.sql.*; class Test { public static void main(String[] args) { try { Class.forName(“sun.jdbc.odbc.JdbcOdbcDriver”); set this to a MS Access DB you have on your machine String filename = “d:/java/mdbTEST.mdb”; String database = “jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=”; database+= filename.trim() + “;DriverID=22;READONLY=true}”; add on to the end now we can get the connection from the DriverManager Connection con = DriverManager.getConnection( database ,“”,“”); } catch (Exception e) { System.out.println(“Error: ” + e); } } }
save this code into a file called Test.java and compile it Notice that this time I imported the java.sql package - this gives us usage of the java.sql.Connection object. The line that we are interested in here is the line Connection con = DriverManager.getConnection( database ,“”,“”); What we are trying to do is get a Connection object (named con) to be built for us by the DriverManager. The variable database is the URL to the ODBC data source, and the two sets of empty quotes (“”,“”) indicate that we are not using a username or password. In order to have this program run successfully, you have to have an MS Access database located at filename location. Edit this line of code and set it to a valid MS Access database on your machine. If you do not already have an MS Access database, please jump down to Set the Access Database up as an ODBC DSN section, which shows how to create an empty MS Access database. If you do have a MS Access database, and this is working correctly, then you're ready to Run an SQL Statement! Step 2 method 2) Set up a DSN and get a connection through that BACK TO TOP Microsoft has provided a method to build a quick Jet-Engine database on your computer without the need for any specific database software (it comes standard with Windows). Using this method, we can even create a blank Microsoft Access database without having MS Access installed! As we learned earlier, MS Access data bases can be connected to via ODBC. Instead of accessing the database directly, we can access it via a Data Source Name (DSN). Here's how to set up a DSN on your system: 1. Open Windows' ODBC Data Source Administrator as follows: * In Windows 95, 98, or NT, choose Start > Settings > Control Panel, then double-click the ODBC Data Sources icon. Depending on your system, the icon could also be called ODBC or 32bit ODBC. * In Windows 2000, choose Start > Settings > Control Panel > Administrative Tools > Data Sources. 2. In the ODBC Data Source Administrator dialog box, click the System DSN tab. 3. Click Add to add a new DSN to the list. 4. Scroll down and select the Microsoft Access (.MDB) driver 5. Type in the name “mdbTEST” (no quotes, but leave the cases the same) for the Data Source Name 6. Click CREATE and select a file to save the database to (I chose “d:\java\mdbTEST.mdb”) - this creates a new blank MS Access database! 7. Click “ok” all the way out Now our data source is done! Here's a complete program showing how to access your new DSN data source: import java.sql.*; public class Test { public static void main(String[] args) { change this to whatever your DSN is String dataSourceName = “mdbTEST”; String dbURL = “jdbc:odbc:” + dataSourceName; try { Class.forName(“sun.jdbc.odbc.JdbcOdbcDriver”); Connection con = DriverManager.getConnection(dbURL, “”,“”); } catch (Exception err) { System.out.println( “Error: ” + err ); } } }
save this code into a file called Test.java and compile it As stated in the code, modify the variable dataSourceName to whatever you named your DSN in step 5 from above. If this complies and runs successfully, it should produce no output. If you get an error, something isn't set up right - give it another shot! Once this is working correctly, then you're ready to Run an SQL Statement! Step 3) Running a SQL Statement on your Access Database BACK TO TOP Once you have your connection, you can manipulate data within the database. In order to run a SQL query, you need to do 2 things: 1. Create a Statement from the connection you have made 2. Get a ResultSet by executing a query (your insert/delete/etc. statement) on that statement Now lets learn how to make a statement, execute a query and display a the ResultSet from that query. Refer to the following complete program for an understanding of these concepts (details follow): This code assumes that you have used the DSN method (Step 2 method 2) to create a DSN named mdbTest. If you have not, you'll need to modify this code to work for a direct connection as explained in Step 2 method 1. import java.sql.*; public class Test { public static void main(String[] args) { try { Class.forName(“sun.jdbc.odbc.JdbcOdbcDriver”); /* the next 3 lines are Step 2 method 2 from above - you could use the direct access method (Step 2 method 1) istead if you wanted */ String dataSourceName = “mdbTEST”; String dbURL = “jdbc:odbc:” + dataSourceName; Connection con = DriverManager.getConnection(dbURL, “”,“”); try and create a java.sql.Statement so we can run queries Statement s = con.createStatement(); s.execute(“create table TEST12345 ( column_name integer )”); create a table s.execute(“insert into TEST12345 values(1)”); insert some data into the table s.execute(“select column_name from TEST12345”); select the data from the table ResultSet rs = s.getResultSet(); get any ResultSet that came from our query if (rs != null) if rs == null, then there is no ResultSet to view while ( rs.next() ) this will step through our data row-by-row { /* the next line will get the first column in our current row's ResultSet as a String ( getString( columnNumber) ) and output it to the screen */ System.out.println(“Data from column_name: ” + rs.getString(1) ); } s.execute(“drop table TEST12345”); s.close(); close the Statement to let the database know we're done with it con.close(); close the Connection to let the database know we're done with it } catch (Exception err) { System.out.println(“ERROR: ” + err); } } }
save this code into a file called Test.java and compile it If this program compiles and runs successfully, you should see some pretty boring output: Data from column_name: 1 While that may not seem like much, let's take a quick look at what we've accomplished in the code. 1. First, we set the DriverManager to understand ODBC data sources. Class.forName(“sun.jdbc.odbc.JdbcOdbcDriver”); 2. Then, we got a connection via the DSN as per Step 2 method 2: String dataSourceName = “mdbTEST”; String dbURL = “jdbc:odbc:” + dataSourceName; Connection con = DriverManager.getConnection(dbURL, “”,“”); We could have used the direct method instead to get our connection. 3. Next, we created a java.sql.Statement Object so we could run some queries: Statement s = con.createStatement(); 4. Then came the exciting stuff - we ran some queries and made some changes! s.execute(“create table TEST12345 ( column_name integer )”); create a table
s.execute("insert into TEST12345 values(1)"); // insert some data into the table
s.execute("select column_name from TEST12345"); // select the data from the table
5. The next part might be a little strange - when we ran our select query (see above), it produced a java.sql.ResultSet. A ResultSet is a Java object that contains the resulting data from the query that was run - in this case, all the data from the column column_name in the table TEST12345.
ResultSet rs = s.getResultSet(); // get any ResultSet that came from our query
if (rs != null) // if rs == null, then there is no ResultSet to view
while ( rs.next() ) // this will step through our data row-by-row
{
/* the next line will get the first column in our current row's ResultSet
as a String ( getString( columnNumber) ) and output it to the screen */
System.out.println("Data from column_name: " + rs.getString(1) );
}
As you can see, if the ResultSet object rs equals null, then we just skip by the entire while loop. But since we should have some data in there, we do this while ( rs.next() ) bit.
What that means is: while there is still data to be had in this result set, loop through this block of code and do something with the current row in the result set, then move on to the next row.
What we're doing is looping through the result set, and for every row grabbing the first column of data and printing it to the screen. We are using the method provided in the result set called getString(int columnNumber) to get the data from the first column in our result set as as String object, and then we're just printing it out via System.out.println.
We know that the data in our ResultSet is of type String, since we just built the table a couple of lines before. There are other getXXX methods provided by ResultSet, like getInt() and getFloat(), depending on what type of data you are trying to get out of the ResultSet. Please refer to the JSDK API for a full description of the ResultSet methods.
6. After that we just cleaned up our database by dropping (completely removing) the newly created table:
s.execute("drop table TEST12345");
7. Lastly, we need to close the Statement and Connection objects. This tells the database that we are done using them and that the database can free those resources up for someone else to use. It is very important to close your connections - failure to do so can over time crash your database! While this isn't too important with a MS Access database, the same rules apply for any data base (like Oracle, MS SQL, etc.)
s.close(); // close the Statement to let the database know we're done with it
con.close(); // close the Connection to let the database know we're done with it
That's it!! Now you know the basics for connecting to a MS Access Database via JDBC!
If you found this useful, please vote for me!
What I assume you already know BACK TO TOP
This document assumes that you are working on a Windows machines since we'll be connecting to a Microsoft Access database.
I assume you are familiar with database concepts. If you don't know anything about what a database is or what it is for, please take 5 minutes and read this description from Webopedia.
I do assume that you understand Java syntax to a degree, and that you are comfortable compiling and executing Java code. If not, please point your browser to the Java Tutorials provided by Sun Microsystems - they'll get you started.
If you found this useful, please vote for me!