Differences

This shows you the differences between two versions of the page.

--- linux:fujitsuix500 [2013/04/16 20:18] – rlunaro
+++ linux:fujitsuix500 [2014/12/27 15:55] (current) – removed rlunaro
@@ Line 1: / Line 1: @@
-====== Fujitsu ScanSnap iX500 in linux ======
-Install git:
-<code>
-# sudo apt-get install git
-# sudo apt-get install libusb-dev
-# sudo apt-get install libgtk-3-dev
-</code>
-Download the latest sources of sane:
-<code>
-# mkdir sane
-# cd sane
-# mkdir frontend
-# mkdir backend
-# cd backend
-# git init
-# git clone git://git.debian.org/sane/sane-backends.git
-# cd ../frontend
-# git init
-# git clone git://git.debian.org/sane/sane-frontends.git
-</code>
-Now, compile the backend:
-<code>
-# cd backend/sane-backends
-# configure
-# make
-# sudo make check
-# sudo make install
-# cd frontend/sane-frontends
-# configure
-# sudo make install
-</code>
-Before installing sane, remove the existing sane instalation (just in case):
-<code>
-# sudo apt-get remove sane
-# sudo apt-get remove xsane
-</code>
-Install saned:
-<code>
-# cd backend/sane-backends
-# sudo make install
-# cd frontend/sane-frontends
-# sudo make install
-</code>
-Now, start saned (sane daemon). Edit the file ''/etc/default/saned'' and set run as yes:
-<code>
-# Set to yes to start saned
-RUN=yes
-</code>
-And run the daemon:
-<code>
-# sudo /etc/rc.d/saned start
-</code>
-Unfortunately, **this doesn't work in my case**.